SAE 100R8 Thermoplastic Hydraulic Hose

Thermoplastic hydraulic hose is thinner than rubber hose with the same inside diameter, it provides superior abrasion resistance, the polyester tube provides excellent low temperature, flexibility and resistance to a wide range of chemicals and petroleum base products. It is commonly used in construction equipment, lubrication lines and hydraulic lift equipment, pressure gauge and valve, and water jetting so on.

Construction

Tube: A thermoplastic inner tube of resistant to hydraulic fluids.

Reinforcement: Reinforced with suitable synthetic fiber.

Cover: A hydraulic fluid and weather resistant thermoplastic.

Temperature: -40 °C to +93 °C (-40 °F to +199.4 °F)

Table 2: SAE 100R8 Thermoplastic Hydraulic Hose Technical Specification
Item Size SAE Size I.D. O.D. Max. W.P. Proof Pressure P.P. Min. B.P. Min. B.R. Weight
mm inch dash min. max. max. MPa psi MPa psi MPa psi mm kg/m
TPHR8-01 5 3/16 -3 4.6 5.4 14.6 35 5075 70 10150 140 20300 90 0.086
TPHR8-02 6.3 1/4 -4 6.2 7.0 16.8 35 5075 70 10150 140 20300 100 0.097
TPHR8-03 10 3/8 -6 9.3 10.3 20.3 28 4060 56 8120 112 16240 125 0.178
TPHR8-04 12.8 1/2 -8 12.3 13.5 24.6 24.5 3550 49 1705 98 14210 180 0.215
TPHR8-05 16 5/8 -10 15.5 16.7 29.8 19.2 2780 38.5 2280 77 11165 205 0.312
TPHR8-06 19 3/4 -12 18.6 19.8 33 15.7 2275 31.5 4565 63 9135 240 0.360
TPHR8-07 25 1 -16 25.0 26.4 38.6 14 2030 28 4060 56 8120 300 0.505
Scroll to Top

Leave a message

Leave a message