SAE 100R7 Thermoplastic Hydraulic Hose

Thermoplastic hydraulic hose is thinner than rubber hose with the same inside diameter, it provides superior abrasion resistance, the polyester tube provides excellent low temperature, flexibility and resistance to a wide range of chemicals and petroleum base products. It is commonly used in construction equipment, lubrication lines and hydraulic lift equipment, pressure gauge and valve, and water jetting so on.

Thermoplastic hydraulic hose provides superior abrasion resistance and pressure
Construction

Tube: A thermoplastic inner tube of resistant to hydraulic fluids.

Reinforcement: Reinforced with suitable synthetic fiber.

Cover: A hydraulic fluid and weather resistant thermoplastic.

Temperature: -40 °C to +93 °C (-40 °F to +199.4 °F).

Table 1: SAE 100R7 Thermoplastic Hydraulic Hose Technical Specification
Item Size SAE Size I.D. O.D. Max. W.P. Proof Pressure P.P. Min. B.P. Min. B.R. Weight
mm inch dash min. max. max. MPa psi MPa psi MPa psi mm kg/m
TPHR7-01 5 3/16 -3 4.6 5.4 11.4 21 3045 42 6090 84 12180 90 0.073
TPHR7-02 6.3 1/4 -4 6.2 7.0 13.7 19.2 2780 38.5 5580 77 11165 100 0.090
TPHR7-03 8 5/16 -5 7.7 8.5 15.6 17.5 2535 35 5075 77 10150 115 0.128
TPHR7-04 10 3/8 -6 9.3 10.3 18.4 15.7 2275 31.5 4565 63 9135 125 0.155
TPHR7-05 12.5 1/2 -8 12.3 13.5 22.5 14 2030 28 4060 56 8120 180 0.224
TPHR7-06 16 5/8 -10 15.5 16.7 25.8 10.5 1520 21 3045 42 6090 205 0.277
TPHR7-07 19 3/4 -12 18.6 19.8 28.6 8.7 1260 17.5 2535 35 5075 240 0.330
TPHR7-08 25 1 -16 25.0 26.4 36.7 7 1015 14 2030 28 4060 300 0.403

Sizeworking pressure and wall thickness can be customized as required

Scroll to Top

Leave a message

Leave a message